Save Time & Increase Performance with DRP Set-Up Tools & Equipment

@DRP_Performance • Rocky MT, Virginia (June 23, 2015)- Better Tools = Better Set-Ups- Try DRP!

DRP RS400PRO Wheel Alignment & Measurement System

Our RS400PRO sets the standard for motorsports wheel measurements.  Reduce time and increase accuracy with high quality, purpose built fixtures.

 In 30-40 minutes, the RS400PRO will accurately and repeatably measure:  Front Toe, Rear End Position, Contact Patch Alignment, Front Camber, Rear Camber, Axle Tube Straightness and Wheel Base.  

Need to adjust toe, a trailing arm or track bar?  The RS400PRO reads the change instantly.  And it doesn’t stop there. The RS400PRO will measure bump steer, Ackerman, Rear Steer, Camber change, Caster change and more by simply motioning the chassis.

And, it’s super easy to use.  More data and better accuracy in less time.  Systems available for most any chassis style.  What are you waiting for?  

RelatedPosts

Dave Mathers’ Motion Motorsport Report – June 19 2023

June 20, 2023

Cornwall Motor Speedway set to start its 54th season of racing

May 17, 2023

RS400PRO-ALM for Asphalt Late Models & Modifieds $3489.
RS400PRO-DLM for Dirt Late Models & Modifieds $3630.
Systems available for immediate delivery.
Free Shipping through June 30!

Ground Plane Laser/Ride Height Kit

This is not your ordinary ground plane laser system.  Our kit uses a dual axis, self leveling laser (vertical and horizontal beams) with a 2″ thick granite base, stainless steel shaft and billet aluminum height adjuster.  The kit also includes (4) billet aluminum ride height rulers with rare earth magnets.  This is the best way to level your scales and quickly read ride heights.

PD21800 $800.

DRP Slip Plates
Slip plates allow the tire to fully relax when scaling.  A must for accurate and repeatable ride heights and wheel weights.  DRP slip plates use a powder coated steel plate with PTFE sheets for a clean, dry and bind free set-up.  

007 90301  4 Plates/4 PTFE Sheets $220

Steering Shaft Locks
Centering and locking the steering shaft is essential for accurate and repeatable set-ups.  Our steering shaft lock kit for Power Rack & Pinions works great.  Place the locks on the cylinder shaft up against the body and the steering will be locked solid.  
007 90130 Lock Kit $27.00

From: DRP Performance Products, Inc.

2089 Crooked Oak Rd,

Rocky Mt, VA 24151

{fcomment}